2024 Exmark Lazer Z E-Series LRE921GKA604A3
- Year 2024
- Make Exmark
- Model Lazer Z E-Series
2024 Exmark Lazer Z E-Series LRE921GKA604A3
2024 Exmark Lazer Z E-Series LRE921GKA604A3
The perfect choice for professional landscaper who want the innovative and commercial-grade quality of a Lazer Z zero-turn riding mower, but in a value package. The Lazer Z E-Series zero-turn mower features the same welded, heavy-duty, 1.5”x 3” tubular steel unibody frame found throughout our Lazer Z models. You can also choose from two rugged Kawasaki® V-Twin engines, a Kohler® Command™ Pro, or a Vanguard V-Twin engine matched to a full-floating, UltraCut™ Series 4 cutting deck, in 48, 52, 60, or 72-inch deck widths. Lazer Z E-Series zero-turn mowers come equipped with a full-suspension seat that enhances operator comfort, leading to less fatigue and increased efficiency.
Features may include:
Hydro Drive, Simplified- Our hydro drive system has no hoses to leak and just one easy-to-change belt. Only simple, annual maintenance is required. It also lowers the center of gravity for improved handling.
- Our one-piece body frame is a classic case of “less is more.” Because, fewer parts equal more strength. And, more durability. So, in the interest of accuracy, the Lazer Z’s unibody frame is actually a case of “less is way more.”
- Gas-powered E-Series models have a single 8-gallon tank with one fill location.
- Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.
- With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.
Engine
Engine Manufacturer
Kawasaki®
Engine Type
Model: FX921V
Displacement
999cc
Emissions
V-Twin
Rated Engine Speed
3,750 RPM
Air Filter
Heavy-duty canister air filtration system.
Fuel System
Fuel Type
Gas Carbureted
Drivetrain
Steering
Hydraulically dampened twin levers, adjustable both fore and aft with a 2-position height adjustment.
Drivetrain
Hydro-Drive | Description: Dual Hydro-Gear ZT-4400, hydrostatic transmissions with charge pumps, relief valves and independent, replaceable filters.
Wheels & Tires
Tires, Front Specification
24 x 12-12, 4-ply Super Turf TL | Drive: 24 x 9.5-12, 4-ply Super Turf TL
Electric
Electrical
12-volt battery with 15-amp alternator.
Brakes
Parking Brake
Lever-actuated internal wet disc brake.
Operational
Operating Speed
Infinitely variable speed selection from 0–11.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Top Speed
Blade: Approximately 18,500 fpm.
Chassis
Frame Type
Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Dimensions
Dimensions
Caster Forks: 0.50" thick caster yoke arms.
Cutting Width
60"
Height
70.1 in. (178.1 cm) | Cutting: 1.5" (3.8 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Length
84.6 in. (214.9 cm) | 3 blades at 20.50"
Width
72.7 in. (184.7 cm)
Capacities
Fuel Capacity
9.5-gallons (36.0-L), large fill neck with single fuel tank and fill location.
Weights
Weight
Curb: 1,093 lbs.
Features
Spindle Type
Blade: No-maintenance, sealed, and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (0.98") diameter spindle shaft and splined blade driver.
Seat Type
Suspension seat, foam flip-up armrests, integral safety switch with adjustment fore and aft from the operator's position.
Construction Material, Deck
A 10-gauge high-strength alloy top that is formed and continuously seam-welded, with a 7-gauge side skirt and a 7-gauge reinforcement plate welded to spindle mounting locations for improved strength.